1997 Honda Civic Alarms Fitting Wiring Diagram Manual Instructions

Download
ALARM/SIREN POSITION Position the compact alarms and the sirens in the engine compartment, under the battery support.
CENTRAL UNIT POSITION Position the modular systems and the modules under the dashboard on the drivers side.
POWER SUPPLY + 30: connect to the free faston at position 5 on the front part of the fuse box. – 31: connect with a ring terminal to one of the terminals coming out of the original power supply on the left lateral side, drivers side.
IGNITION WIRE + 15/54: connect to the YELLOW/BLACK wire of the 6 way brown connector of the fuse box.
DIRECTION INDICATORS Connect to the 1,5 mm2 GREEN/BLUE and YELLOW/GREEN wire located in the 20 way green connector at the centre of the fuse box.
CENTRAL DOORS LOCKING See diagram nr. 60 for antithefts of the Bridge serie and diagram nr. 60A for antithefts of the 3100 serie.
IMMOBILISATION POINT Fuel pump Cut the 1,5 mm2 YELLOW/GREEN wire located in the brown connector which works as a support to the grey relay of the fuel pump located to the left of the fuse box.
STARTER + 50: cut the YELLOW/BLACK wire located in the coming out of the brown connector above the handle of the bonnet
BONNET SWITCH Position the modular systems and the modules under the dashboard on the drivers side.
DOORS SWITCH Connect to the 0,35 mm2 REED/GREEN wire located in the bundle of cables that goes under the sill cover, drivers side.
BOOT SWITCH Connect to the 0,35 mm2 GREEN wire located in the bundle of cables that goes under the sill cover, drivers side.
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS FITTING DIAGRAM N° 60A Diagram for doors locking on HONDA CIVIC ’97 (for series 3100 anti thefts)